## Full Adder | Definition | Circuit Diagram | Truth Table

Before you go through this article, make sure that you have gone through the previous article on Half Adder.

We have discussed-

• Half Adder is used for the purpose of adding two single bit numbers.
• Half adders have no scope of adding the carry bit resulting from the addition of previous bits.
• To overcome this drawback, full adder comes into play.

• Full Adder is a combinational logic circuit.
• It is used for the purpose of adding two single bit numbers with a carry.
• Thus, full adder has the ability to perform the addition of three bits.
• Full adder contains 3 inputs and 2 outputs (sum and carry) as shown-

## Full Adder Designing-

Full adder is designed in the following steps-

### Step-01:

Identify the input and output variables-

• Input variables = A, B, Cin (either 0 or 1)
• Output variables = S, Cout where S = Sum and Cout = Carry

### Step-02:

Draw the truth table-

 Inputs Outputs A B Cin Cout (Carry) S (Sum) 0 0 0 0 0 0 0 1 0 1 0 1 0 0 1 0 1 1 1 0 1 0 0 0 1 1 0 1 1 0 1 1 0 1 0 1 1 1 1 1

### Step-03:

Draw K-maps using the above truth table and determine the simplified Boolean expressions-

### Step-04:

Draw the logic diagram.

The implementation of full adder using 1 XOR gate, 3 AND gates and 1 OR gate is as shown below-

To gain better understanding about Full Adder,

Watch this Video Lecture

Next Article-Half Subtractor

Get more notes and other study material of Digital Design.

Watch video lectures by visiting our YouTube channel LearnVidFun.